Painting brake calipers can be a great way to spruce up the look of your car. It is a relatively simple process that requires minimal tools and supplies. After you have completed the painting process, your car will look like it just rolled out of the showroom! In this article, we will discuss how to prepare, paint and finish your brake calipers so you can get that perfect look.
Preparing Your Brake Calipers for Painting
Cleaning and Sanding Your Brake Calipers
Before any painting can take place, the brake caliper must be thoroughly cleaned. Use an automotive cleaner or degreaser to remove dirt, grease, dust, and road grime from the surface of the brake caliper. If there are any areas of damage or rust present on the caliper, use sandpaper or a wire brush to lightly scour away these imperfections. Make sure that all areas are smooth and even before proceeding onto priming.
Priming Your Brake Calipers
After cleaning and prepping the surface of your brake caliper for paint, you will need to apply a primer coat in order for it to adhere properly when spray painted. A primer is also important for providing a protective barrier that will protect your brake caliper from wear and tear, as well as the elements. Apply several light coats of primer to the brake caliper, allowing each coat to dry before applying another.
Painting the Brake Calipers Using a Spray Gun
Once your brake calipers are fully prepped and primed, you can move onto painting. Using a spray gun is the best way to apply an even coat of paint onto your brake caliper, but you can also use aerosol cans if needed. If using a spray gun, make sure that it is set up properly and has been tested prior to starting painting. When selecting a color for your brake calipers, stick with standard automotive colors that match or complement the color of your car’s paint job.
Once you have chosen a paint color, it is time to start spraying! Make sure that you are wearing protective goggles and gloves before starting. Begin by lightly spraying an even coat of paint onto one section of the brake caliper at a time – making sure not to leave any sections uncovered or over-spray any areas. Once all sections have been painted, allow the paint to dry completely before moving onto the next coat. Repeat this process several times, until you have achieved your desired look.
Finishing Touches on your Newly Painted Brake Calipers
After the desired amount of coats of paint has been applied to your brake calipers, it is important to add any finishing touches. This can include a coat of clear sealant or wax in order to protect the paint and keep it looking glossy for years to come. After allowing the sealant or wax to dry, reattach any components that were taken off during the painting process and you will be ready to hit the road!
Safety Considerations When Painting Your Brakes
When painting brake calipers, it is important that safety measures are taken in order to avoid any accidents or injuries. Make sure that you are wearing safety goggles and gloves at all times while spraying and that proper ventilation is present. It is also important not to spray too close or overlap areas as this could lead to paint build-up which may decrease braking performance when used.
Conclusion
Painting brake calipers are a great way to give your car an upgraded look without spending too much money on modifications. With some preparation, painting, and finishing touches, you can completely transform the look of your car. Be sure to take safety precautions when conducting this process and always make sure that your brakes are functioning properly before taking them out on the road.
Add Comment